Cable Assemblies for Factory Automation Environments
Our high performance factory automation cable assembly products provides the engineer and network designer a one-stop-shop for any application of connectivity solution of any industrial network device.
LOROM’s M8 and M12 cable assemblies to meet many custom requirements. Single-ended and double-ended versions are possible with straight and angled connectors.
Our extensive know how and product capability offers:
- IP67 I/O connections
- Cables capable of10 million flex cycles
- Cold bend and impact, cut through and crush resistant constructions
- Abrasion resistant designs
- Ruggedized outdoor versions, UV and weather resistance solutions, inclusive direct burial
- Weld splatter resistance
- High and low temperature resistance, in excess of 150°C
- Signal integrity performance guaranteed, maximum head room in transmission distance
- Dust protected by design
- Corrosion resistance, chemicals and aggressive medias
Industrial Ethernet
Selecting the correct selection of suitable devices and materials is a significant factor for reliability and quality of the industrial network. For us, this means that in addition to exceeding and meeting all IEEE standards for Signal Integrity but also high performance in EMC compliance.
Small data packets and timely transfer are critical requirements for Industrial Ethernet. Our cable assemblies uses only the best connectivity ensuring excellent in SI as well as EMC performance even after severe abuse guaranteeing reliable and accurate data transmission.
Our cable extensive portfolio of cable assemblies for industrial applications designed for optimal reliability, ease of use and exceeds the SI (signal integrity) demands of high-speed data transmission, ready for 10 gigabit.
Our series of Industrial Ethernet cable assemblies are designed to meet any industrial environments.
PROFIBUS
PROFIBUS is probably world’s leading popular industrial bus factory automation network.
Advantages of PROFIBUS, along with other factory automation network and bus systems can reduce operating costs, increase productivity, decrease time-to-market for new products and improve product quality.
PROFIBUS has been developed in conjunction with the International Standards Organization OSI (Open Systems Interconnect) seven-layer model. Access to the bus is defined in the second layer of the OSI model, allowing PROFIBUS the option of multiple masters on a single twisted pair cable.
LOROM offering includes application specific custom cable designs are available upon request with solution-oriented features such as:
- Armoring: Steel, Stainless Steel braid
- Armor Tapes: Corrugated Copper, Aluminum and Steel
- Jackets: PVC, CPE, LDPE, TPE, HDPE, Fluor copolymer, Oil Res II, Low Smoke Zero Halogen (LSZH) and Polyurethane
- Shielding: Overall Aluminum Mylar foil, bonded foil, TC Braid, TC Double Braid,
- Insulations: Skin Foam Skin, PE, XLPE, FEP, Polypropylene, Foam FEP, HDPE, PVC, TPE and PVC-Nylon
- Complies with Profibus specification EN50170-2-2:1996
- Standard version UL listed PLTC CSA CMX-Outdoor-CMG and FT4
Connector Face: Nylon
Molded Body: PUR
Coupling Nut: Nickel-plated brass
Connector Body: PVC, TPU, TPE
Contact: Brass with gold plating
Operating Temperature: -20 to +80° C, 150C on special request
Protection: IP67
High Power Cord Sets
- Voltage: 600V AC/DC
- Protection: IP67
- Weld slag resistant
- Cable: Oil, water and abrasion resistant
- Connector Face: PVC
- Connector Body: PVC
- Contact: Brass with Gold over Nickel plating
- Coupling Nut: Black epoxy-coated Zinc
- Cable: UL Type STOOW, Hard Service Cord
- Cable Jacket: PVC or PUR
- Operating Temperature: -20 to +105° C
See Lorom’s Range for High Power Cord Sets
Application and Standards We Serve:
- DeviceNet
- Profibus
- FieldBus
- Industrial Ethernet
- CC-Link
- EIB
- Interbus
- CANBus EIA485
- SafetyBus
- AS interface
In House Designed and Manufactured Connectors
Connector Face: PVC-UL STD 94-V
Over-Mold: PVC-UL STD 94-V, PUR/TPE
Coupling Nut: Zinc die-cast with coating Stainless Steel Nickel-plated Brass
Contact pins: Brass with Gold plating over Nickel Excessive product selection, up to 14 pins
Operating Temperature: -20°C to +80° C (optional high temperature in excess of 150°C)
Protection: IP67 (IP68 per request)
NEMA Rating: NEMA 6 360° shielding
International and national standards:
- IEC 60130-9
- CENELEC EN 50 044
- SAE-J-1738A
- NEMA 6
Category 5e, 6, and 7 Cable Assemblies
Connector Face: PVC-UL STD 94-V
Molded Body: PVC-UL STD 94-V
Coupling Nut: Zinc die-cast with black epoxy coat Stainless Steel or Nickel-plated Brass
Connector Body: PVC, TPU, TPE
Contact: Brass with Gold plating
Operating Temperature: -20°C to +80° C, 150°C on special request
Protection: IP67
See Lorom’s Range for Industrial Ethernet Cables
DeviceNet
When it comes to excellence and know how in high flexes cables LOROM engineering has the most optimal cable assembly solution.
Rugged DeviceNet cable specifically designed for the tough plant environments utilizing networked discrete automation and control.
Through continued product innovation and engagement with the top leading equipment and component manufacturers, we remain the leading manufacturer of cables for industrial networking.
LOROM DeviceNet Cable assemblies include offerings:
- 10 million flex cycle ODVA Mid about flex testing
- Thick and Special PLTC Thin PLTC (power limited tray cable) rated –CL2 and CL3 per NEC 725.61
- Special PLTC Thin design with 22AWG data pair, PLTC rated
- Thick cable 600V rated, thin cable 300V rated
- Oil, sunlight, weather resistant gray PVC, LSOH and PUR jackets
- Direct burial, outdoor use
Connector Face:PVC-UL STD 94-V
Molded Body: PVC-UL STD 94-V
Coupling Nut: Zinc die-cast with black epoxy coat, Stainless Steel or Nickel-plated Brass
Connector Body: PVC, TPU, TPE
Contact: Brass with Gold plating
Operating Temperature: -20°C to +80° C, 150°C on special request
Protection: IP67
