100 Ohm Category 5e AWG 24 CMR & CMP UTP & FTP

Designed for terminating outside plant networks to transmission equipment and digital switching located at Central Office facility, customer premises and outdoor cabinets. Supports Category 5e performance to xDSL, VDSL and VDSL2.

Unshielded twisted pair (utp) and shielded (f/utp) category 5e cable for use in backbone cabling systems as described in ansi/tia/eia 568-b.

• The cable consists of #24 awg solid bare copper insulated conductors, assembled into 25 tightly twisted pairs, with a ripcord, under an overall jacket.
• The plenum rated cable is for use in air handling ducts and spaces in accordance with article 800 of the national electrical code (nec). The cable is ul (usa) & cul (canada) listed for this application by passing nfpa 262 (ul 910 or ft-6 steiner tunnel) test.
• The riser (non-plenum) rated cable is for use as a vertical run in a shaft and for general purpose communications use in accordance with article 800 of the nec.
• The cable is ul (usa) & cul (canada) listed for this application by passing the ul 1666 riser cable flammability test.
• The cable also passes the csa ft4 vertical flame test
• Cables in cable trough from clause 4.11.4 Of csa c22.2 No. 0.3.
• These cables comply with the eu-rohs directive 2002/95/ec (restrictions on hazardous substances) regulations.
• Supported applications: ieee 802.3 10Base-t (ethernet), 100base-t (fast ethernet), and 1000base-t (gigabit ethernet), ansi.X3.263 Fddi tp-pmd, ieee
• 802.5 4 And 16 mbps token ring, atm up to 155 mbps, 550 mhz broadband video and standards under development such as atm at 622 mbps.

Reference Electrical Characteristics